How to use Windows Password Recovery Standard

Go back to see HowTo for three versions of Windows Password Recovery 6.0, Please refer to:

How To Use Windows Password Recovery Standard 6.0
How To Use Windows Password Recovery Professional 6.0
How To Use Windows Password Recovery Enterprise 6.0

1

Part 1: How to Set to Boot the Computer from CD-ROM Drive in BIOS?

1. If your computer rebooted into Windows with Windows Password Recovery 6.0 (Sta, Pro, Ent) CD/DVD in the drive, please reboot it and press "F2" or "Delete" to enter your BIOS setup.

2.On the "Advanced" tab, make sure your CD-ROM is setup to boot before your hard disk (your BIOS setup may be different from the screenshot below, please consult your BIOS manual on how to change the boot device order).

3.Insert Windows Password Recovery 6.0 (Sta, Pro, Ent) CD/DVD in your CD/DVD drive if you haven't already done so.

4. Press "F10" and "Y" followed by "ENTER" to save the new BIOS settings and reboot your computer

2

Part 2: How to Set to Boot the Computer from USB Flash Drive in BIOS?

1. Insert newly created Windows Password Recovery 6.0 USB Flash Drive in your computer.

2. Please reboot your computer and press "F2" or "Delete" or "F10" to enter your BIOS setup.
Restart the computer which your want to reset Windows Password. As it starts it should display an option to enter the system set up menu, or BIOS, commonly reached by keys like DELETE, F1, F2, F10, F12 or Alt+S. Use whichever keystroke is indicated on screen. In some cases your computer may display a graphic while it starts. Typically, pressing Esc will dismiss the graphic and allow you to see the necessary messages.

3. Looking for a tab or menu relating to booting in the BIOS setup software's opening screen. In this example, it's simply called "BOOT", and can be accessed by using the tab and/or arrow keys to highlight the word "BOOT" on the menu bar. Once there, hit enter, and you'll see a submenu that's specific to how the PC boots.

4. Using the tab "and/or" arrow keys,select "Hard Disk Drives", and hit "Enter".

5. Select the "1st Drive", hit "Enter".

6. Select the "USB: your USB brand", in the example it is "USB: Kingston DTG(4G)", and hit "Enter" to Set the USB Flash drive as the first bootable option.

7. When you're done with the BIOS setup program, using the tab and/or arrow keys to navigate to the EXIT menu, select the option for saving the changes you just made, and then reboot. (In many BIOSes, a special key--often the F10 key--will save, exit, and reboot in one step.) When your computer restarts, it will boot from the USB flash drive.

NOTE: To reboot your PC with a CD/DVD disk, it's necessary to change your computer's setting to make it boot from the CD/DVD. Click here To learn how to set BIOS to boot from the CD/DVD-ROM